Physical Connection for the DSS
Mount the DSS to the phone with the hardware provided
On the back of the phone there is one connection point for the DSS the PC Port
On the back of the DSS there are three possible connection points.
Power – Connect the 5volt power adapter to the wall outlet and to this power jack
Uplink – Connect the Uplink Jack on the DSS to the Phone PC Jack with the short provided cable
Downlink – Use the Downlink to connect a 2nd DSS unit or a PC.
Provisioning the DSS:
- Login to the Customer Portal
- Go to “Devices”
- Go to the Device that you have Physically connected the DSS to
- Double Click on that Device
- On the right side menu select Expansion Modules
Click on the Gear & Click on Add
It will present you with the DSS Module
It will now present the DSS Programming to you.
In Each Drop Down select the type of feature you want to use.
For Speed Dial enter the Number with no Dashes
Label Override allows you to put Text defining the Speed Dial
When you are finished entering the programming, click on Save & Reboot.
Make sure the User knows you are rebooting their Phone.
It will take several minutes to Reboot and upload the new Configuration
When the Reboot is complete, this will complete the installation of the DSS.