This guide will walk you through the process of Provisioning a SNOM PA-1 Device for use on the Crexendo VIP platform. This is considered a manual provision and the device will only be connected to the server we assign it to. The device will not be a part of the 100% uptime guarantee.
1. Create the Extension and User in the Crexendo VIP Manager Portal (Disable the Voicemail box by unchecking the Enable Voicemail)
2. Get the information for the snom by going to Users > Phones and clicking on the Pencil Icon:
3. Get the IP Address of the Snom
(Quickly Tap the IP/Reset Button to get the IP address of the device)
You will need to have the device hooked up to the speaker system or a pair of headphones plugged into the line out jack on the device
4. Put the IP address into a local web browser:
5. Click on Identity 1 on the left side of the screen
6. Fill In the fields with the information:
Display Name: (Username)
Account:(Username)
Password:(Password)
Registrar:(Domain/Proxy)
Outbound Proxy: (Outbound Proxy)
Authentication Username:(Username)
7. Press Apply
8. Click the RTP Tab:
(Add your Multicast Address to the Relay Address field)
9. Click Advanced under Setup > then click SIP/RTP
10. Turn on Multicast Support and add the listening address for the multicast for your setup:
11. Click on System information and check the Identity Status to make sure the registration is OK
12. The Device is then Provisioned and ready to use on VIP